Corten steel planter suitable for farm and household use

The round shape is a normal shape in the daily life.Its ordinary shape can make it suitable with all kinds of design styles.And look at the surface,its surface is copper color.This color is changed from black gray after it exposed in natural climate for a long time.In fact,this copper color is belong to the oxide layer,which can protect it from corrosion.So this weathering steel also can help you save much time and money.This model has three standard sizes,we also can produce the customized planter according to your requirements.
Model Number:AHL-CP19
Thickness(MM):2.0
Size(cm):15(D)*6(W)/20(D)*6(W）/30(D)*6(W)
Surface:rusted and powder coating

This AHL corten planters has a distinctive rusty color and can be hung on the wall.Do you like this type of flower pot?Using the plasticity and natural corrosion of weathering steel, it gives people the feeling of rust, and the “rust” color of the corten planter makes people addicted. This visually and climate-sensitive, recyclable landscape is not only artistic, but also echoes contemporary notions of environmental protection and sustainability.

Whether it’s your room, your patio, or the bland entrance wall of your home, the AHL weatherproof steel flower basin has the perfect design balance, durability, and convenience — and with a modern modular design, is the perfect fit to elevate your outdoor decor to a whole new level. It is made of thick-gauge, full-seam welded weathering steel with a furniture quality finish, which gives planting flexibility, impact, frost, crack, and scratch qualities.

Our modular corten steel planters can be used throughout the roof terrace. The modular design is very economical to manufacture and can accommodate many popular sizes. The corten steel planters are arranged in the base grid, leaving a gap between the concrete paving and the corten steel planters. This allows the pots to drain directly to the ground floor, eliminating staining from the concrete paver.
Material:Corten steel
Thickness:1.5mm-6mm
Size:Standard and customized sizes are acceptable
Color:Rust or coating as customized

AHL steel home garden use decoration corten steel planters will welcome you the second you simply gaze at their spectacular shapes with a jaw-dropping buoyancy effect. Embrace the feeling of home, where luxury and exclusiveness reside on its purest forms.

Straight POTS are high quality steel flower basin panels available in straight standard sizes to suit a variety of designs, available with weather-resistant or powder coatings for any RAL colour. The panel system is preformed to the standard size required for your project and is easy to handle and install in the field. The panels feature a unique folding design that ensures a strong supporting structure while minimizing weight, making them ideal for rooftop terrace applications.

Decorative corten steel planters For Landscaping is Made from corten steel which is almost pure carbon steel but processed in order to have a protective layer on the surface to make it weather-proof. The surface is originally greyish, due the weather conditions it turns reddish-brown (resembles the colour of rusting), which becomes darker within time.

If used properly,corten steel is expressive, durable and maintenance-free and can stand the test of time in its own peculiar way.

Decorative corten steel flower pot is made of 2mm superior corten steel,and thelarge outdoor planter size can be customized,always used for garden or Landscaping,we have different style of planters,large outdoor planter,metal flower pot,square corten steel planters and the round corten steel planters.
Size:150*30*30cm
Thickness:2mm

The corten steel planters are made of a kind of weathering steel.This steel has high quality weathering steel. And the corten steel planters like most modern planters, its shape is usually cubic,and this shape with its rust-like color has a simple yet modern and unvarnished style.And this style can be come more creative opportunities when you designs your garden.There are seven standard sizes for your choice and we also provide customized service according to your needs.
Thickness(MM):2.0
Weight(KG):8/14/22/30/41/53/82
Cubic Size(CM):30/40/50/60/70/80/100
Package Size(CM):35/45/65/75/85/105

This small cute planter box are made of corten steel 100%.Compared with the plastic planter pot and ceramic planter pot,the corten steel metal planter pot has many advantages.It has more weathering resistance and more stable.It is also light.If you need other sizes and color.We also can provide other sizes and color according to your needs.
Model:AHL-CP3
Size:200*200*200mm
Material:Corten steel/Mild steel/Stainless Steel
Color:Rusty Color/Powder Coat Color

Most of the AHL corten steel planter pot are made of corten steel.In addition to the corten steel,if you need the stainless steel or mild steel,we also can provide other material planter pot.Now the corten steel become more and more popular among the European and American markets.During to it’s unqiue style and strong resistance ability.So using the corten steel planter pot is a good choice.
Model:AHL-CP05
Material:Corten Steel/Mild Steel/Stainless Steel
Size:500*500*500mm
Color:Rusty Color/Powder Coat Color

Corten steel flower basin flower pool is common in the landscape, weather resistant steel flower box compared with the traditional flower box, the use of more long, decorative effect is more beautiful .
Model:AHL-CP15
Thickness(MM):2.0
Weight(KG):17
Size(CM):D50*H50
Package(CM):55*55*55

Our high grade weathering steel has a unique look and naturally oxidized surface.Weathering steel is a combination of gold steels developed to eliminate the need for coatings that develop a stable rust-like appearance when exposed to the elements.

The service life of the metal planter pot is longer then the plastic planter pot.And the weight of metal planter pot is light than the ceramic planter pot.Now because of the environment friendly,the corten steel works become more and more popular among the Europe and American.The AHL hanger planter pot are made of corten steel 100%.If you want to know more details,please check our website or send email to us.
Model:AHL-CP10
Size:400*400mm
Thickness:1.5mm/2.0mm
Material:Corten Steel/Stainless Steel/Mild Steel

In the United States in the 1930s, coal wagon manufacturers noticed that certain steel alloys developed a layer of rust that, when exposed to these elements, would not corrode the steel, but would protect it. So Corten steel was born, and the oxide film on the surface also became the oxide film of corten steel, and each product can form a unique color and state.

The Corten steel planter will arrive in its natural grey steel condition – a deep, warm, rusty color that develops over time. However, the patina of the corten steel planter is not as corrosive as real rust – it is purely for aesthetics, but does not affect the integrity of the planter.
Material:Corten Steel/Mild Steel/Stainless Steel
Size:200*200*200mm
Color:Rusty Color/Original Color/Powder Coat

Under normal circumstances, we all think rust is bad, but for corten steel, this is a strange phenomenon. When exposed to air, it forms a patina, a protective metal coating. Over time, the color of corten steel changes from bright orange to dark brown and later purple, which blends well with nature.

Modern farmhouse rustic design corten steel planters for Patio, Deck and Backyard
This corten steel planter is made from a fully seam welded, thick gauge corten steel which arrives in it’s bare steel unrusted state;
corten steel planters will then develop a beautiful rust patina naturally over time
Size can be customized accordingly by AHL Corten steel Co.,Ltd

In recent years, gardeners have been drawn to the allure of weathering steel. The clean lines and beautiful, rustic finishes it creates in the yard are a major lure, and for good reason. However, if you’re not ready to commission a professional landscaper to install custom work for you, then consider finding some weathering steel planters.

AHL corten steel planter gardens can help you bring plants and nature to places otherwise off the beaten track, such as kitchen windowsills or backyard patios. Metal garden pots are an alternative to clay pots and wood pots. And at the bottom of the pot, we also have drainage holes to make your plants grow healthier.
Material:corten steel/stainless steel/mild steel
Color:original color/rusty color/powder coat
Size:1200*400*600mm

With their distinctive weathered appearance and unmatched durability, Corten steel planters effortlessly blend form and function. These planters age gracefully over time, developing a rich patina that adds character and depth to any outdoor space. The inherent strength of Corten steel ensures that these planters can withstand the harshest elements, making them a reliable choice for both residential and commercial applications. The versatility of Corten steel planters allows them to seamlessly integrate into various design styles, from sleek contemporary settings to rustic and industrial landscapes.

Nature style metal flower pot for city gardens landscape
Corten steel is normally used for landscaping and exterior construction or garden decoration. You can combine different forms and sizes of Watbick Corten Steel Planters to decorating your environment or drawing boundaries between them. The Corten is the best fit for contemporary garden plans.
All season use. The Corten steel is also known by weathering steel, like says the name is designed to withstand any kind of weather. On the contrary, it will benefit from the climate to generate the rusty color mentioned before.

Big size planter corten garden rusting modular steel planter box outdoor steel planter
Corten steel plate (red curtain wall steel plate, landscape steel plate, carved steel plate) is between the ordinary steel and stainless steel cheap alloy steel series; outdoor corten steel decoration adopts new technology to sustainable development and innovation, and is becoming the world’s top steel technology.

Industrial Landscape corten steel large metal planter for park project
This large metal planter crafted from thick gauge, fully seam welded Corten Steel
corten steel large metal planter crafted all Veradek Metallic Series planters are proven to resist weather-related issues such as cracking in both winter and summer months.
Size:customized

Industrial Landscape Large mobile tree planters for Landscape architecture company are made from premium quality raw metal,Industrial strength construction with precise manufacturing guarantees extreme durability and a lifetime of use.
Material:
Corten steel
Thickness:
1.5mm-6mm
Size:
Standard and customized sizes are acceptable
Color:
Rust or coating as customized
Shape:
Round, square, rectangular or other required shape

Corten steel planter pot is used in many cases, and it plays a relatively large role in the construction and maintenance of garden landscapes. Atmospheric corrosion resistance, long service life can be used for a long time. Corten steel planters come in many styles. There are rectangular ones, square ones, round ones and special-shaped ones. The overall production method is to cut and then weld them together. The production process of corten steel flower pots is relatively uncomplicated.

 From patios and decks to landscaped lawns, there are planters of all sizes to suit both commercial and domestic settings. Fill your room with your favourite plants and make a stunning statement in your outdoor space.

Corten steel,commonly known as corten steel,is a steel alloy first produced by U.S. Steel company in 1933.The corten steel forms a protective oxide alloy when exposed to repeated drying and wetting cycles.The corten steel is resistant to corrosion due to its alloying composition resistance. Compared with the ordinary steel,it does not experience blistering,flaking.
Model:AHL-CP10
Size:400*400MM
Thickness:1.5mm/2.0mm
Material:Corten Steel/Stainless Steel/Mild Steel

Every AHL metal plangter is carefully designed. Whether it’s a stainless steel planter made of durable 304 stainless steel or a corten steel planter made of 100% corten steel. Their edges are seam welded to ensure your narrow planter box is waterproof, and the paint-free pots not only protect your plants but the environment as well.
Material:corten steel/stainless steel/mild steel
Color:original color/rusty color/powder coat
Size:1200*400*600mm

Using a kit made from Corten steel can offset the cost of having to take on another big project of assembling a custom wood planter. No sawing, sanding or heavy equipment required. In terms of assembly, corten steel planters are easy to put together. Each kit comes complete with all the metal panels and hardware needed to assemble and integrate it into your landscape. Just screw the beds together, add a filler of your choice (both soil and soilless planting mixes will work), and start planting!

Weathering steel can be sustainably developed and innovated after integrating into the new mechanism, new technology and new process of modern metallurgy. It is one of the series of steel at the forefront of the world’s super steel technology. It is a low alloy steel system between ordinary steel and stainless steel. Weathering steel is made of common carbon steel with a small amount of copper, nickel and other elements, with the strength of high-quality steel, plastic extension, molding, welding and cutting, abrasion, high temperature and other characteristics; The weatherability is 2~8 times of the general carbon steel, the coating property is 1.5~10 times of the general carbon steel, can reduce the use of thin, bare use or simplify the use of coating. The steel has the characteristics of thinning and reducing consumption, saving labor and energy

This weathering steel planter will prove to be a great addition to any garden or outdoor space. Crafted from real weathering steel (beware of imitations), this striking and very popular Corten steel channel planter features a welded construction with smooth corners. It comes fully assembled and ready to display in your outdoor space.